Curtis Instruments

 Preco Safety

 Printed Motor Works

Curtis Speed Controller - AC Motor - 24v 60A 1230-2001

$ 364.10 each

+

{tab=Description}

Description:

Curtis Model 1230 programmable speed controllers provide smooth and seamless control of AC induction motors. An advanced MOSFET power section, combined with a sophisticated micro-processor provides high efficiency and silent operation.

Application:

The Curtis 1230 AC controller is designed for small material handling and other light industrial vehicles using AC induction motors, such as pallet movers, stackers, personnel carriers and sweeper/scrubbers.

{tab=Features}

Features

  • State-of-the-art Design
  • Responsive and accurate closed-loop speed control.
  • Smooth regenerative braking and seamless reversing.
  • Internal battery discharge indicator (BDI), hour meter and maintenance timer.
  • High frequency, silent MOSFET design.
  • Compact and rugged housing with fuse mounting.

Highly Flexible and Programmable

  • Fully compatible with the Curtis 1311 handheld and 1314 PC programming station for testing, diagnostics and parameter adjustments.
  • Multimode™ feature allows two selectable vehicle operating profiles.
  • Programmable forward and reverse speeds, acceleration and deceleration/braking rates.
  • Serial interface for the Model 840 gauge for BDI, hour meter, timer and fault code display
  • Multiple throttle types supported; 5kΩ, 0-5V and wig-wag.
  • Easily configured to match most AC induction motors.
  • Electromagnetic brake driver (2 amps).

Safe and Protected

  • Meets or exceeds EEC fault detection and safety requirements.
  • Emergency reverse function with signal continuity check.
  • "Ramp restraint" feature restricts vehicle movement while in neutral.
  • Power-on self test and continuous fault monitoring.
  • Dual watchdog circuits ensure proper software operation.
  • Programmable High Pedal Disable (HPD) and Static Return to Off (SRO) functions.
  • Shorted and open throttle faults are detected with proper controller shutdown.
  • Internal clamps for inductive fly-back of coils.
  • Controller over-temperature protection.
  • Over and under-voltage protection.
  • Low battery charge LED warns operator of possible battery damage.
  • On-board fault code status LED with external LED driver for remote viewing of fault codes.

Meets or complies with relevant US and International Regulations

  • EN50081-2 emissions
  • EN50082-2 immunity
  • IEC 801-2 level 4 ESD
  • VDE0117
  • EN1175-1 safety
  • IP 53 environmental protection

Options

  • Internal main contactor.
  • Multiplexed control signals to reduce vehicle/tiller wiring.
  • Auxiliary outputs (2) for relays, horn or solenoid control.
  • CAN Bus communications for integration into distributed control systems.

{tab=Model Chart}

  Battery Voltage

Motor Current 2 minutes

Motor Current 1 Hour

Options

Model # (volts) (amps rms) (amps rms) Main Contactor 1312 Interface 2 Aux OUtputs CAN

1230-2001

24

60

30

 

1230-2002

24

60

30

       

1230-2101

24

90

40

 

1230-2102

24

90

40

       

1230-2201

24

120

50

 

1230-2202

24

120

50

       

1230-2301

24

150

60

 

 

1230-2302

24

150

60

       

1230-2401

24

200

80

 

 

1230-2402

24

200

80

       

1230-2403

24

200

80

   

{tab=Dimensions}

Curtis Instruments - AC Motor 1268

{/tabs}