Curtis Instruments

 Preco Safety

 Printed Motor Works

Speed Controller - Permanent Magnet Motor - Programmable 24v 70A 1210-2401

$ 198.00 each

+

The Curtis 1210 Motor Speed Controller provides precise and smooth control of permanent magnet drive motors for battery powered vehicles.

Ideal for 3 and 4 wheel mobility aids (scooters) and light industrial products such as pedestrian sweepers and scrubbers. The 1210's programmability allows it to be used anywhere low power permanent magnet motors are employed.

{tab=Features}

Features

  • Smooth and Secure Control
  • Advanced closed-loop speed regulation maintains precise speed over varied terrain, obstacles, curbs and ramps.
  • Linear cutback of current ensures smooth control, even with low batteries or on hot days, with no abrupt loss of power.
  • Speed Limit potentiometer input provides control over the maximum vehicle speed.
  • Proprietary algorithms help prevent gearbox wear while providing smooth starts and reversals.
  • The vehicle is brought to a complete stop before the electromagnetic brakes are applied to prevent harsh jarring.
  • Inhibit line prevents driving while charging.
  • Key-Off Decel function ensures a smooth brake to stop when the key is turned off.
  • Anti roll-back/roll-forward function improves vehicle control on hills and ramps.
  • Internal main contactor provides secure power-off and reverse battery polarity protection. Easy Installation and Setup
  • Over 40 parameters can be easily programmed with Model 1311 handheld or 1314 PC programmers, or direct from factory.
  • Interfaces to several throttle types, including wigwag (center-off).
  • Simplified troubleshooting and diagnostics.
  • Standard 18 pin Molex and Fast-on terminals provide proven robust connection.

Valuable Additional Features

  • Push-Switch input releases the brake and allows the motor to free-wheel.
  • Push-Too-Fast software restricts vehicle top speed, even with the key off.
  • Built-in functions simplify the wiring needed to add a seat lift.
  • Multi-mode provides for two distinct and programmable control modes (indoor/outdoor modes).
  • Power Saver function deactivates the main contactor after a period of non-use to reduce battery drain.
  • Battery Discharge Indicator output option provides an accurate signal of the battery charge.

Meets or complies with relevant US and International Regulations

The Curtis Model 1210 motor speed controller is designed to meet:

  • EN 12184
  • EN 55022
  • IEC 801
  • FDA documentation filed
  • TÜV Certified

Robust Safety and Reliability

  • Unique power design produces low RF emissions to meet stringent medical limits.
  • High RF immunity prevents speed variation and shutdowns in noisy RF environments.
  • Controller power circuits and microprocessor software are continuously monitored for proper operation.
  • System start-up checks detect a defective throttle, brake, or associated wiring and disables drive.
  • Reverse Beeper function alerts bystanders.

{tab=Model Chart}

MODEL CHART

 

Voltage Rating

Drive Current

Model No.

(Volts)

 

1210-22XX

24

45A

1210-24XX

24

70A

T Ü V  C o m p l i a n c e:

This Curtis product complies with the regulations of TÜV, the German service company which tests products and sets standards for product safety and quality. EMC compliance depends upon the installation and is the responsibility of the equipment manufacturer. Shielding may or may not be needed. When installed with the recommended shielding, the controller itself will meet TÜV EMC requirements. The deceleration adjustment must be set to meet all applicable TÜV braking distance requirements.

{tab=Dimensions}

DIMENSIONS:

Curtis Instruments - Speed Controller 1210

{/tabs}